Hear what Trotec customers say worldwide

Outside dimensions: 1920 x 1240 x 1140mm

Work area: 1420 x 820mm

Laser power: 60 to 200 watts

Engraving speed: 25.4 metres/sec

Acceleration: 2g

Weight: 520 - 580 kg (depending on laser source)

Accuracy: +/- 0.1

Addressable accuracy encoder: +/- 0.0046

Static repetitive accuracy: <+/- 0.15

Full Specification Sheet (PDF)

Gas Kit 
With the Gas Kit, up to two procedure gases (pressurised air, N2, ...) can be connected. This prevents fires, improves the transport of dust, and also protects the lens. With certain materials, processing results are greatly optimized in this manner.

i-Cut® 
Extremely precise registration mark recording and cutting-pathcompensation system. With the aid of registration marks, it recognizes distortions in printed materials and adjusts the cut path. This is indispensable in the printing industry, in the manufacture of plastic foil keyboards, or in the treatment of some acrylic items.

Cutting Table System With Cross-Flow Ventilation 
With the cutting table system the Speedy 500 is configured to process thicker materials. An integrated jet strip generates cross flow ventilation under the material, removing the dust, fumes and other debris generated by the lasing process.  Material support on low reflection anodized aluminium plates (may be replaced by acrylic plates).

Vacuum Table 
Thin and light weight materials that generally do not lay flat on the surface can be engraved well, cut or marked when used in combination with the vacuum table (e.g. film, plastic laminates, veneers, paper,...)

Honeycomb Table with Vacuum Table 
Used in combination with the vacuum table, the aluminium honeycomb table enables the cutting of thin materials that require a strong vacuum. Port in the lower honeycomb area help ensure an even vacuum distribution throughout the entire processing surface.

Speedy 500 Rotary attachment 
The largest rotary engraving device on the market! Cylindrical, conical or spherical objects such as glasses, globes or bottles with a length of up to 104 cm, diameters of up to 25 cm, and weight of up to 10 kg can be engraved with no problem.

Auto Focus 
Electro-optical auto focus with light barriers. Simple setup due to automatic and proper focusing of the laser beam on the workpiece surface.

1 years parts/labour standard*
5 years parts/labour request info**

Technical support by email, web site, internet, (LogMeIn Rescue) & phone.

Return to base service - £POA

Priority access to technicians*

**Subject to annual SureCare service

Machines

Materials

Consumables

About Us

Service

How to engrave:

Markets: