MATERIAL > ENGRAVING BRASS
Name:
  Engraving Brass
Thickness key:
0.5mm
Material:
   CZ120 Hard Temper
Finish:
   Bright Mill and Polished
Sheet size:
  1220 x 610mm, 1000 x 600mm
Thickness:
   6mm to 0.5mm
Uses:
   Exterior/Interior signs and plaques
Cutter type:
  Rotating Carbide
Cutter depth:
  Dependant on selected infill
Fabrication:
   Guillotines, saws, drills and punches
Other features:
   Paint or wax infill
Note - Engraving quality brass sheet. Polished and vinyl coated on one side.
 SIZES AND COLOURS AVAILABLE
Size: 4" x 2" (1220mm x 610mm)
Code Colours / Finish Available Description / Thickness

4000

 Available in Mill, Polished 2 sides and Satin Finish. 6.0mm (4swg)
4005 Available in Mill, Polished 2 sides and Satin Finish. 3.0mm (10swg)
4010 Available in Mill, Polished 2 sides and Satin Finish. 2.0mm (14swg)
4015 Available in Mill, Polished 2 sides and Satin Finish. 1.5mm (16swg)
4020 Available in Mill, Polished 2 sides and Satin Finish. 1.2mm (18swg)
4025 Available in Mill, Polished 2 sides and Satin Finish. 0.9mm (20swg)
Size: 1000mm x 600mm
Code Colours / Finish Available Description / Thickness

4030

 Available in Polished. 0.5mm (25swg)
 CUT TO SIZE SERVICE
Thickness Size (in Square inches)

0.9mm (20swg)

2", 3", 4", 5", 6", 7", 8", 9", 10", 11", 12", 13", 14", 15", 16", 17",
18", 19", 20", 21", 22", 23", 24", 25", 26", 27", 28", 29", 30", 30"+

1.2mm (18swg)
1.6mm (16swg)
2.0mm (14swg)
3.0mm (10swg)
Note: Sizes exceeding 30 square inches are available but require purchase of full sheets subsequently cut to your spec.
 OTHER SERVICES

Hole Drilling (up to 4mm diameter), nominal distance from corners
Self Adhesive Backing (all thicknesses)
Saw cut edges - Please enquire
Discs - Please enquire
 

Unit 4 Faraday Close, Pattinson Industrial Estate, Washington,
NE38 8QJ, England
Tel: +44 (0) 191 417 4505 Fax: +44 (0) 191 415 3410
Registered in England 153192