System 2516i
Tungsten Carbide Standard Cutters
| Collet Spindle |
| 1/4" diameter 5" long 1/8" tip - CTRSGT9 |
| 1/4" diameter 5" long 3/16" tip - CTRSGT10 |
| 1/4" diameter 5" long, Solid - CTRSGS18 |
| 2D Cutters | 3D Cutters | |
| 0.8mm PCB Cutter - HTEM 0.8 | 1.6mm Bull Nose Cutter - HTBN 1/16" | PCB Cutter Holder - 26-98033 |
| 1.0mm PCB Cutter - HTEM 1.0 | 3mm Bull Nose Cutter - HTBN 1/8" | |
| 1.2mm PCB Cutter - HTEM 1.2 | ||
| 1.5mm End Mill Cutter - HTEM 1.5 | ||
| 2.0mm End Mill Cutter - HTEM 2 | ||
| 3.00mm End Mill Cutter - HTEM 3 | ||
Dust Extraction Software
| Vacuum Boot 1/4" - 20-00003 | Super Pro 6 - Windows98,2000,XP | |
| Hi-Flow Vacuum Boot - 29-98705 | Surelab 7 - Windows 2000,XP | |
| Vacuum Speed Controller - 98-98000 | SureType 2004 - Windows 2000,XP | |
| Vac Chip Hose Kit | ||
| Vacuum Relay Box - 29-98605 |
| Vac Pump Extraction Unit with Bin -29-98602 | ||
Suregrave Cutter Knobs Clamps
| 1/4" Cutter Knobs (2516) - 26-16440 | Push on Clamp (2516) - 29-99002 |
| Bristol Spline Wrench - 30-11440 | Table Fences 1.5" Long (each) - TF1 |
| Table Fences 5" Long (each) - TF2 | |
| Table Fences 9" Long (each) - TF3 | |
| Spare Fence Screws - TF4 | |
Suregrave Nosecones
| Metal | Nylon | Vac Chip Boot | Circlips |
| Straight Unthreaded Nosecone 5.7mm Opening - 26-30090 | Straight Unthreaded Nosecone 3.3mm Opening - 26-38660 | Vac Chip Boot 1/4" - 20-00003 | 1/4" - 25-00001 |
Spindles & Spindle Motors
| Machine Spindle Motors | Machine Spindles | Driver Belt |
| 1/4" System 2516 Collet Spindle - Z1-00023 | System 2516 - Z1-00026R | |
| 1/4" System 2516 Top Loading Spindle - |
Accessories
| Universal Vice Unit | Allen Keys - 4.0mm - 30-98004 |
| Self Centering Vice Unit | Allen Keys - 3.0mm - 30-98005 |
| Spare Mains Inlet Fuse - 6.3 Amp quick blow 20mm | Allen Keys - 2.5mm - 30-98006 |
| Allen Key - 1.27mm PCB - 30-98011 |